NDT Equipments

It is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage. The terms Nondestructive examination (NDE), Nondestructive inspection (NDI), and Nondestructive evaluation (NDE) are also commonly used to describe this technology. Because NDT does not permanently alter the article being inspected, it is a highly-valuable technique that can save both money and time in product evaluation, troubleshooting, and research. Common NDT methods include ultrasonic, magnetic-particle, radiographic, remote visual inspection (RVI).

Canin +Corrosion Analyzing Instrument

Technical Information Canin+ :

General
Temperature range: 0° to 60°C
Display: 128 x 128 pixel graphic LCD with backlight
Impedance: 10 MΩ
Memory: Non-volatile memory for simultaneous storage of up to 235’000 potential measurements
(980 pages @ 240 measurements each organised in up to 71 objects)
Data Output: RS 232 interface, with USB adapter
Battery Operation: Six LR 6 batteries, 1.5 V for up to:
- 60 hours (or 30 hours with activated backlight) during potential measurement
- 40 hours (or 20 hours with activated backlight) during resistivity measurement
Case Dimensions: 580 x 480 x 210 mm (22.8” x 18.9” x 8.3”)
Potential Measurement
Measurement range: -999 mV to +340 mV
Resolution: 1mV
Data Transfer: CANIN ProVista software for downloading data and evaluation on PC

Equotip Piccolo 2 / Bambino 2

Technical Specifications:

With Impact device D With Impact device DL
Measuring range 150-950 HLD 250-970 HLDL
Instrument dimensions 147.5 x 44 x 20 mm (5.71 x 1.75 x 0.79 inches) 203 x 44 x 20 mm (7.99 x 1.75 x 0.79 inches)
Instrument weight 142 g (5 ounces) 152 g (5.4 ounces)
General Specifications
(applicable to both Equotip Piccolo 2 and Equotip Bambino 2)
Conversions 80-955 HV, 81-678 HB, 20-70 HRC, 38-102 HRB, 30-100 HS
(Equotip Piccolo 2 only: 274-2193 N/mm2)
Resolution 1 HLD / HLDL, 1 HV, 1 HB; 0.1 HRC, 0.1 HRB, 0.1 HS (Equotip Piccolo 2 only: 1 N/mm2 Rm)
Measuring accuracy ± 4 HLD / HLDL (0.5% at 800 HLD / HLDL)
Maximum test hardness 890 HLD (955 HV, 68 HRC)
Impact direction / energy Automatic compensation / 11 Nmm
Ball indenter Tungsten carbide (approx. 1’500 HV), 3 mm (0.12 inches) diameter
Housing Scratch-proof, hard-coated zinc alloy
Battery Rechargeable Li ion, operation period over 20’000 impacts, charging current 100 mA
Integrated memory Non-volatile, RAM 32 kBytes, ~ 2’000 measured values (Equotip Piccolo 2 only)
Operating conditions Temperature: -10 to +60 °C (14 to 140 °F), Humidity: 90% max.

Pull-off tester

DYNA Z units with digital manometer

Technical Information

DYNA Tensile force Resolution Accuracy Permissible stroke
Z16 16 kN 0.01 N/mm² < 2% 3.5 mm
Z6 6 kN 0.01 N/mm² < 2% 4.0 mm

The legs can be moved and/or lengthened on all models to adapt the positioning to the different test situations.

DISPLAY : up to five different units (e.g. N/mm² for test disc of 50 mm dia., force in kN)

BATTERY : type CR 2430 for manometer for 150 hours operation

WEIGHT : 6.25 kg

DYNA ZE with electronic display device and pressure sensor

Technical Information

DYNA Tensile force Resolution Accuracy Permissible stroke
Z16 16 kN 0.01 N/mm² < 2% 3.5 mm
Z6 6 kN 0.01 N/mm² < 2% 4.0 mm

DYNAMETER Display device with non volatile memory for 1000 measured values

WEIGHT : 8 kg

DISPLAY : 128 x 128 graphic LCD

INTERFACE : RS 232

INTEGRATED SOFTWARE : transmission of all measured values to printer and PC

TEMPERATURE RANGE : -10° to +60°C

BATTERY : 6 LR6, 1.5V (60 hours operation)

Torrent permeability tester

Technical Information Basic Unit

Display Unit with nonvolatile memory for 200 measured objects

DISPLAY : RS 232 or with adapter to USB

INTERFACE : type CR 2430 for manometer for 150 hours operation

SOFTWARE : Integrated for printing out measured objects and transmission to PC

BATTERIES : 6 1.5 V, LR 6 batteries for 60 hours operation

TEMPERATURE RANGE : -10° to +60° C

CARRYING CASE : 325 x 295 x 105 mm, total weight 2.1 kg

Control Unit with membrane pressure regulator and pressure sensor

VACCUM CONNECTION : small flange 16 KF

CARRYING CASE : 520 x 370 x 125 mm, total weight 6.3 kg