Products

Calibration

High accuracy calibration equipments, trained personnel & strict environmental conditions are maintained to ensure low uncertainty of measurement.

SGM calibration laboratory has strength of over twenty five experienced & extensively trained engineers to provide competent and reliable calibrations at laboratory or at customer's site.

SGM's state-of-the-art calibration facility provides recalibration services for a wide range of calibration products and different measurement signals. The calibration facility provides recalibration services for temperature, pressure and electrical signals.

Following Parameters are taken up for calibration:


THERMAL INSTRUMENTS
1.Oven
2.Humidity Chamber
3.Incubator
4.Deep Freezer
5.Hot Plate
6.Muffle Furnace
7.Water Bath
8.Glass Thermometer
9.Refrigerator
10.Thermocouple
11.RTD Sensor
12.Temp. & Humidity Indicator
13.Temp. Indicator
14.Data Logger with Sensor
15.Laser Gun(up to 400 deg. C.)
16.Laser Gun(up to 1200 deg. C.)
MECHANICAL INSTRUMENTS
1.Volumetric Glassware
2.Balance(upto 100 kg.)
3.Weights(F1 class per piece)F2M1M2
4.Micrometer(upto 50mm)
5.Vernier Caliper(upto 300mm)
6.Measuring Scale(upto 5mtr)
7.Steel Scale(upto 3mtr)
8.UTM(2000KN)
9.Pressure Gauge
10.Vaccum Gauge
11.Stop Watch/Timer
12.CTM(1000KN)
13.Weights(M1,M2 class per piece)
ELECTRICAL INSTRUMENTS
1.Ampere Meter
2.Volt Meter
3.Watt Meter
4.Milli Ampere Meter
5.Micro Ohm Meter
6.Power Factor Meter
7.Power Analser
8.Multi Meter
9.Clamp Meter
10.LCR Meter
11.Technometer
12.Frequency Meter
13.Turn Ratio Meter
14.Insulation Tester
15.KV Meter
16.Sound Level Meter