Used for determining the Flakiness Index of Aggregates.
It Determines Bulk Density or unit weight of aggregates.
For The Determination of the Unit Weight of Aggregates.
Used for sampling Aggregates, Ores, Refractory . The instruments has 14 Nos. Chutes of 13mm width and is complete with receivers.
Used for Sampling Aggregates, Ores, Refractory. The instruments has 16 nos. Chutes of 25mm width and is complete with Receivers
For Measuring of Resistance of Aggregate to Crushing.
For Determining The aggregate Impact Value.
Used for testing Crushed Rock, Crushed Slag, Crushed and Uncrushed Gravel For Resistance to Abrasion.
This apparatus is used to determine Softening point of Bitumen. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia steel ball, drops a specified distance when heated under specified conditions.
Electrical heating, with a Heater and Energy Regulator, Suitable for operation on 230 V, 50Hz, Single Phase, A.C. supply
Used to determine grade of bitumen. The penetration tests determine consistency of bitumen for the purpose of grading.
Same as EI 5003 but the unit is compact with timer to control duration of penetration. The instrument is provided with lead screw gear arrangement, Leveling screws, Spirit level.
A straight edge approximately 3 metres in length may be used to determine lateral surface regularity of a road surface.
The Instrument is used for determination and checking of Bitumen percentage in Bituminous mix, the mix is added with a solvent and dissolved bitumen is removed by centrifugal action.
Centrifuge Extractor, Electrical Operation, Capacity 1500g, with a Dimmer stat for speed control from 2,400 to 3,600 rpm. Suitable for operation on 230 V, 50 Hz, Single Phase, A.C. supply.
measures the Say bolt Viscosity of petroleum products at specified temperatures between 70o F and 210o F. This is also used for determining the Saybolt Furol Viscosity of bituminous materials at temperatures of 250, 275, 300, 350, 400 and 450 F.
This apparatus is used to determine Softening point of Bitumen. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia steel ball, drops a specified distance when heated under specified conditions.
It is designed specifically for the purpose of drilling test cores from or holes in, Roads, Airport Runways, Bridges etc.
Automatic Compactor for Bituminous Mixes is fully automatic and easy to operate.
Designed to test three specimens simultaneously. The machine consists of a carriage moving over a lead screw. An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation. The entire assembly is mounted with a stainless steel lined water bath completely encased in metal bound hardwood. It is equipped with an electric pump circulator and heater.
The improved Benkelman Beam is a convenient, accurate device for measuring the deflection of flexible pavements under moving wheel loads. Operating on a simple lever arm principle, the unit consists. Supplied with carrying case.
Thank you for taking the time to get to know us better. Kindly submit your requirments. Our Sales Team will contact you at earliest.